Icom Ic F25sr Software Development
Click Here https://bytlly.com/2tuV3d
How to Program the Icom IC-F25SR Two Way Radio
The Icom IC-F25SR is a compact and lightweight two way radio that operates on the PMR446 license-free band. It offers 16 channels, CTCSS and DTCS tone squelch, voice scrambler, low battery alert, and a range of accessories. The IC-F25SR is ideal for business and personal use, such as security, hospitality, construction, and outdoor activities.
One of the features of the IC-F25SR is that it can be programmed using a PC and a compatible software and cable. Programming the radio allows you to customize the channel frequencies, tones, power output, scan settings, and other functions. Programming can also help you to clone the settings from one radio to another, or to update the firmware of the radio.
In this article, we will show you how to program the IC-F25SR using the official Icom CS-F25SR programming software and the OPC-478UC cloning cable. You will need a Windows PC with a USB port and an internet connection to download the software.
Step 1: Download and Install the CS-F25SR Software
The CS-F25SR software is available for purchase from Radiotronics UK[^1^], or you can get it for free when you buy the OPC-478UC cable from them. To download the software, you will need to create an account on their website and add the software to your shopping cart. After checkout, you will receive an email with a link to download the software.
Once you have downloaded the software, unzip the file and run the setup.exe file to install it on your PC. Follow the instructions on the screen to complete the installation. You may need to restart your PC after installation.
Step 2: Connect the Radio to the PC
The OPC-478UC cable is a USB to 3.5mm jack cable that connects the radio to the PC. You will need to install a driver for the cable before using it. The driver can be downloaded from Radiotronics UK[^1^] or from Icom UK[^3^]. To install the driver, unzip the file and run the setup.exe file. Follow the instructions on the screen to complete the installation.
After installing the driver, plug one end of the cable into a USB port on your PC and plug the other end into the SP/MIC jack on the side of the radio. Make sure that both ends are firmly connected and that the radio is turned off.
Step 3: Run the CS-F25SR Software
To run the CS-F25SR software, double-click on its icon on your desktop or in your start menu. The software will open with a blank screen. To read or write data from or to the radio, you will need to select
the correct COM port that corresponds to your cable. To do this, click on Set from
the menu bar and then click on Port.
A window will pop up with a list of available COM ports. Select
the one that matches your cable (you can check this in your device manager) and click OK. The software is now ready to communicate with your radio.
Step 4: Read Data from the Radio
To read data from
the radio, click on Read from
the menu bar and then click on Read from Transceiver. A window will pop up asking you to confirm
the operation. Click OK and then turn on your radio. The software will start reading data from
the radio and display it on
the screen. This may take a few seconds or minutes depending on
the amount of data.
Once
the reading is complete, you will see
the channel frequencies, tones, power output, scan settings, and other functions of
the radio on
the screen. You can edit any of these settings by clicking on them and changing their values. You can also save
the data as a file by clicking on File from
the menu bar and then clicking on Save As.
Step 5: Write Data to
the Radio
To write data to
the radio, click on Write from
the menu bar and then ec8f644aee